Phone: 816-628-6711
105 W. Washington - Kearney, MO 64060
M-F: 7:30AM-5:30PM; SAT: 8:00AM-NOON; SUN: CLOSED
24 Hour Emergency Service on Heating and Cooling


Call Us: (816)628-6711

Before You Call

Before calling for HVAC emergency service, please read the tips below.
It may prevent a service call or help us diagnose your problem quicker.

What problem are you having with you system right now?
  • Air Conditioner - No Cooling


    • Check the settings on your thermostat.

      • Make sure the temperature control selector is set below the current room temperature
      • Make sure the system switch is on the COOL or AUTO position.
      • The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the air conditioner is operating.
    • Try to get the air conditioner to turn on by lowering the thermostat to its lowest temperature setting.
    • If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
    • Make sure all registers are open and not obstructed.
    • Check the power disconnect switch by each unit (outdoor and indoor).
    • Check the fuse/breaker at the electrical panel for both the outdoor and indoor unit.
    • If the problem persists, please call us at (816)628-6711
    Back to Top
  • Heat Pump - No Cooling


    • Check the settings on your thermostat.

      • Make sure the temperature control selector is set below the current room temperature
      • Make sure the system switch is on the COOL or AUTO position.
      • The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the heat pump is operating.
    • Try to get the heat pump to turn on by lowering the thermostat to its lowest temperature setting.
    • If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
    • Make sure all registers are open and not obstructed.
    • Check the power disconnect switch by each unit (outdoor and indoor).
    • Check the fuse/breaker at the electrical panel for both the outdoor and indoor unit.
    • If the problem persists, please call us at (816)628-6711
    Back to Top
  • Heat Pump - No Heat


    • Check the settings on your thermostat.

      • Make sure the temperature control selector is set above the current room temperature
      • Make sure the system switch is on the HEAT or AUTO position.
      • The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the heat pump is operating.
    • Try to get the heat pump to turn on by raising the thermostat to its highest temperature setting.
    • If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
    • Make sure all registers are open and not obstructed.
    • Check the power disconnect switch by each unit (outdoor and indoor).
    • Check the fuse/breaker at the electrical panel for both the outdoor and indoor unit.
    • If the problem persists, please call us at (816)628-6711
    Back to Top
  • Gas Furnace - No Heat


    • Check the settings on your thermostat.

      • Make sure the temperature control selector is set above the current room temperature
      • Make sure the system switch is on the HEAT or AUTO position.
      • The fan switch should be set to ON for continuous airflow or AUTO if you want the blower to operate only while the furnace is operating.
    • Try to get the furnace to turn on by raising the thermostat to its highest temperature setting.
    • If the air flow out of your registers seems low, check the air filter. An extremely dirty air filter can block air flow.
    • Make sure all registers are open and not obstructed.
    • Check the power disconnect switch by the furnace.
    • Check the fuse/breaker at the electrical panel for the furnace.
    • Check to make sure the gas control valve to the furnace is open.
    • Check the pilot light. (Electronic ignitions will not have a pilot light).
    • If the problem persists, please call us at (816)628-6711
    Back to Top